KV2 Audio JKP - Manual (Page 12)

OUTPUT
PHANTOM IN
OUTPUT
LEVEL
7
9
FREQ
100
60
20
30
120 150
180
280
300
JK
T
JKT - Tone Generator -
Phantom powered
Features
12
POWER
2
3
1
Power
source
2
3
1
OUTPUT
PHANTOM POWERED
LOW Z 50Ω
OUTPUT
600Ω
TONE
generator
x1 x10
x100
FREQ
20-300Hz
PINK
NOISE
SINE
PARALLEL
OUTPUT
WHITE NOISE
generator
PINK NOISE
generator
WHITE
NOISE
LEVEL
JKT Block diagram
M A D E I N C Z E C H R E P U B L I C
JKT - Tone Generator
The JKT is the perfect tool for checking and tuning PA systems along with various
pieces of equipment. Phantom powered it has two XLR Outputs and ¼” Jack Out.
The JKT delivers a full range of tones from 20Hz through to 30kHz, as well as both
White Noise and Pink Noise.
1. Phantom Power Supply
For ease of use, the JKT is powered by phantom power from the mixing console.
Phantom power supply presence is indicated by a single green LED.
2. Multiple Outputs
The symmetrical LINE OUT output works with an impedance of 50Ω, and is
intended to be connected to a mixing console or any phantom power source
device. The adjacent MONITOR OUT output has an output impedance of 600Ω
and paralleled 1/4” jack connector output.
3. Generator Selector
The JKT features a sine wave, tone
generator with a frequency range from
20Hz to 30kHz, pink and white noise
generator.
4. Frequency Selector
Sets the frequency range of the continuous frequency selector of the
sine wave generator in ranges (20Hz ÷ 300Hz), (200Hz ÷ 3kHz) and
(2kHz ÷ 30kHz).
5. Output Level
Sets the output level of selectable generators.
JKT - FRONT PANEL
JKT - REAR PANEL
JKT, TONE GENERATOR
Product number:
KVV 987 272
5 3
1 2 2
4 4
2