KV2 Audio FB-0002 Rigging - Manual (Page 4)

KV2 Audio presents this manual and instructions for the safe practice, suspension and rigging of the
ES Loudspeaker products using the ES Flybar system.
It is important that users familiarize themselves with all the necessary parts, products and instructions
as described and indicated in this document before attempting any over-head suspension, flying and
rigging.
The ES Loudspeaker enclosures are designed with built in suspension points to facilitate secure flying
and rigging providing that no modifications or external parts are substituted and that all instructions
are adhered to at all times.
KV2 Audio operates a continous process of improving and attaining standards: This means that
instructions and methods may be subject to change without notification and it is the responsibility of
users to check for updated information regarding safe flying procedures.
There are accepted 'General Rigging Practises' appropriate to the Entertainment Industry and this
document aims to encapsulate them specifically to the KV2 Audio ES Loudspeaker systems described
here.
It is vital that only persons whom have experience and prior knowledge of rigging techniques and
hardware execute overhead suspension. If in doubt with regards to applying the instructions within
this document, then obtain the necessary specialist advice and help, or contact your local KV2 Audio
representatives for assistance.
All advice and instructions given and stated within this document are based upon the highest avai-
lable engineering data from within the country of manufacture , with regards to materials, general
practice and is accurate at the time of original printing.
Specifications are subject to change due to constant testing, product refinements and R&D.
Regarding 'General Rigging practises' means that general regulations and requirements are possibly
subject to alterations in different Countries and may be superseded locally.
KV2 Audio, as such is not responsible for the safety of any suspension, flying over-head of all specific
KV2 Audio Loudspeaker products, or Rigging configurations as executed in practice by users.
It is expressly the sole responsibility of the user to ensure that at all times any KV2 Audio product or
system is suspended and rigged in accordance with current International and local regulations.
All non KV2 Audio products such as hoists, clamps, wires, truss, supports used ,or required to suspend
KV2 Audio Loudspeaker systems are the sole responsibility of the user.
Introduction
WARNING ! - Safety Rigging
ES F
lybar
Introduction
Introduction
4