Blaupunkt BRONX MP75 - Manual (Page 40)

81
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
TMC for dynamic
navigation systems
TMC stands for “Traffic Message
Channel”.
Traffic reports are broadcast digitally
using TMC, which means they can be
used by compatible navigation systems
during route planning. Your car sound
system has a TMC output, which you
can use for connecting Blaupunkt nav-
igation systems. You can find out from
your Blaupunkt dealer which naviga-
tion systems can be used with your car
sound system.
Amplifier/sub-out
The car sound system provides con-
nections that allow you to connect ex-
ternal amplifiers. You can also connect
a subwoofer to the device’s integrated
low-pass filter. In order for this to work,
the amplifier and subwoofer must be
connected in the manner described in
the installation instructions. We recom-
mend you use well-matched products
from the Blaupunkt or Velocity product
ranges.
Switching the internal amplifier
on/off
If you use external amplifiers, you can
switch off the device’s internal amplifi-
er (“INTERNAL AMP OFF” setting).
Note:
● Please check this setting if the
loudspeakers do not emit any
sound.
➮
Press the MENU button 9.
➮
Press the softkey 5 assigned to
the “VARIOUS” display item.
➮
Repeatedly press the softkey
5
assigned to the “AMP ON” display
item until the “INTERNAL AMP
ON” or “INTERNAL AMP OFF”
setting that you want is displayed.
The “AMP ON” softkey will be dis-
played with a dark background if
the internal amplifier is switched
on.
➮
Press the joystick OK
8 or the
MENU button
9 to close the
menu.
The settings are saved.
AMPLIFIER/SUB-OUT TMC
2.Bronx_MP75_gb 16.08.2005, 14:22 Uhr 81