Blaupunkt BRONX MP75 - Manual (Page 20)

61
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Setting the scanning time
➮
Press the MENU button 9.
➮
Press the softkey 5 assigned to
the “VARIOUS” display item.
➮
Press the softkey 5 assigned to
the “SCANTIME” display item.
➮
Move the joystick 8 up/right or
down/left to adjust the scanning
time.
➮
Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Note:
● The scanning time that you set is
also applied by the system to
scanning carried out in CD/MP3
mode and CD-changer mode.
Storing stations
Storing stations manually
➮
Select the FM memory bank that
you want, i.e. FM1, FM2, FM3,
FMT or one of the MW or LW
wavebands.
➮
Tune into the station that you want
as described in the section enti-
tled “Tuning into a station”.
➮
Press one of the six softkeys for
longer than two seconds to assign
the station to that softkey.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are
stored in the FMT memory bank.
Note:
● If your device is configured for the
USA region, you can also use the
Travelstore feature in AM radio
mode. The stations will then be
stored in the AMT memory bank.
Note:
● Any stations that were previously
stored in this memory bank are
deleted in the process.
Starting the Travelstore function
➮
Press the TUNER button = while
in radio mode.
The radio functions menu appears in
the display.
➮
Press the softkey
5 assigned to
the “T-STORE” display item.
The storing procedure begins. “TRAV-
EL STORE” appears in the display.
After the process is completed, the ra-
dio will play the station that is stored in
location 1 of the FMT (or AMT) memo-
ry bank.
Listening to stored stations
➮
Select the memory bank or wave-
band.
➮
Press the softkey 5 that is as-
signed to the station name or fre-
quency of the station that you
want to listen to.
RADIO MODE
2.Bronx_MP75_gb 16.08.2005, 14:22 Uhr 61