Blaupunkt BRONX MP75 - Manual (Page 18)

59
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Selecting the waveband /
memory bank
This device can receive programmes
broadcast over the FM, MW and LW
(AM) wavebands.
There are four memory banks for the
FM range and one for each of the MW
and LW ranges.
Six stations can be stored in each
memory bank.
Note:
● If your device is configured for the
USA region, you can choose be-
tween the FM and AM wave-
bands. There are three additional
memory banks available for the
AM waveband: AM1, AM2 and
AMT.
Selecting the waveband
To select the FM, MW or LW wave-
band,
➮
press the TUNER button = while
in radio mode.
The radio functions menu appears in
the display.
➮
Press the softkey 5 assigned to
the “BAND” display item.
➮
Press the softkey
5 assigned to
the “FM” display item for the FM
waveband.
➮
Press the softkey
5 assigned to
the “MW” display item for the MW
waveband.
➮
Press the softkey 5 assigned to
the “LW” display item for the LW
waveband.
The main radio menu for the selected
waveband is displayed.
Selecting an FM memory bank
To switch between the FM memory
banks FM1, FM2, FM3 and FMT,
➮
press the NEXT button 4 repeat-
edly until the memory bank that
you want is displayed.
The memory banks are accessed in the
following order: FM1, FM2, FM3 and
FMT.
Note:
● If your device is configured for the
USA region and you selected the
AM waveband, you can additional-
ly switch between the AM memory
banks (AM1, AM2 and AMT) by
pressing the NEXT
4 button.
Tuning into a station
There are various ways of tuning into
a station.
Automatic station seek tuning
➮
Move the joystick 8 down or up.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
You can also tune into stations manu-
ally.
Note:
● You can only tune into stations
manually if the RDS function is
deactivated.
➮
Move the joystick
8 left or right.
RADIO MODE
2.Bronx_MP75_gb 16.08.2005, 14:22 Uhr 59