Connect ductwork, Bottom trim replacement – Best IEX42 User Manual

Page 11

- 11 -

CONNECT DUCTWORK

1. Use 8" round metal duct to connect the

discharge collar on the hood to the ductwork
above.

2. Use duct tape to make all joints secure and

air tight.

3. Remove the two temporary retaining

screws from the lower flue and set it in place
on the hood.

4. Secure decorative flue to hood with two

mounting screws (3,9x9,5mm).

LOWER FLUE

8” ROUND METAL

DUCT

RETAINING

SCREWS

MOUNTING

SCREWS

(3.9X9.5MM)

BOTTOM TRIM
REPLACEMENT

1. Remove the four (4) screws from the inside

of the hood.

2. Remove the trim by pulling downward.

3. Slide the new trim upward onto hood.
4. Replace the four screws removed in step

1 above.