KD Scientific Legato OEM 950 User Manual
Page 27
Upgrading Legato 950 OEM Series Software
1. Upload the latest software version to your desktop (format is filename.srec).
2. Disconnect all I/O devices and then connect the pump to PC using a USB cable.
3. Using the Syringe Pump Communicator program, type ‘boot’ to enter “Boot Loader Mode”.
4. From the CD provided with the pump, open the Legato 950 OEM Series Pump Updater Application.
5. Click Open Update File and browse to the file previously saved on your desktop and click Open.
6. Click Start Update.
7. After the update is complete, press Reboot to power cycle the pump.
27
Appendices
K
D
S
L
e
g
a
to
9
5
0
O
E
M
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 950 OEM Series Syringe Pump User’s Manual
Publication 5617-012 Rev A
✐
NOTE: Prior to upgrading, users will need
to install the KDS Legato 950 OEM Series
USB driver as well as the bootloader
driver file (KDS Legato 100 Series -
Bootloader.inf). Reference “USB Virtual
Comport Driver Installation”.
phone
508.429.6809
fax
508.893.0160
web
www.kdscientific.com
NOTE: To exit boot loader mode without
upgrading the software, power cycle the
pump.
✐