KD Scientific Legato OEM 950 - Manual (Page 11)

11
Operating the KDS Legato 950 Series
K
D
S
L
e
g
a
to
9
5
0
O
E
M
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 950 OEM Series Syringe Pump User’s Manual
Publication 5617-012 Rev A
EXTERNAL PUMP CONTROL
This section of the KDS Legato 950 OEM Series manual
describes the control of the pump using an external
computer device. If communicating via the USB Port, see
Appendix C for one time installation instructions of USB
Driver.
Setting Up HyperTerminal
HyperTerminal is a Windows application designed to
support the external control of devices such as the KDS
Legato 950 OEM Series pump through a USB
connection. The following instructions describe the
configuration of the HyperTerminal application.
1. Select “Start – All Programs – Accessories –
Communications – HyperTerminal”.
2. Enter a name for a New Connection
(i.e KDS_Legato_100), then click OK.
4. Set up the Port Settings as shown below
and click OK.
3. Select the Virtual Comm Port from the “Connect
using” drop-down list. Click OK. (If the Virtual Comm
Port is not known, use Device Manager to find it.
Instructions on setting up the Virtual CommPort Driver
are supplied in Appendix C.)
5. Verify the Settings are as shown below.
6. Choose ASCII Setup and select “Echo typed
characters locally”then click OK to complete
the setup.
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
✐
NOTE: To determine the proper comport,
in your PCs “Systems Properties” screen,
under the “Hardware” tab, select
“Device Manger”. Expand the “ports
(COM & LPT)” section and you should see
“Syringe Pump”. The comport is listed next
to this in parenthesis.
✐
NOTE: To determine if your pump is
connected correctly, in Hyperterminal’s main
window press ‘Enter’; a ‘:’ should appear. If
not connected properly, close Hyperterminal,
turn off the pump, unplug then re-plug the
USB cable and re-open Hyperterminal.
✐
NOTE: The KD Scientific Pump Terminal
Program , provided on the Legato CD, can
be used for easy external control of the
Syringe Pump via USB connection.