KD Scientific 910 OEM Pump - Manual (Page 13)

14
KDS Milliliter OEM Module
14
HYPER-TERMINAL: Terminal Emulation Software (continued)
You may want to save the setup information under a descriptive filename.
4. At the PC, launch HyperTerminal with the above setup specifications (if it is not already
running). Type PROM? at the PC keyboard and verify that the pump module's version
is displayed at the PC terminal.
5. Type RUN to start the pump; type STOP to stop the pump. After starting the pump, >
should be displayed, indicating pump is infusing. After stopping the pump, : should be
displayed.