Katun Sharp AR 207 Copiers - Toner Refill Kit - Manual (Page 2)

Inspect contents of carton to ensure all components are included.
Kit Contents:
Note: All recommended tools and materials are available from Katun.
Important:
• Keep original cartridge packaging for reuse.
• Follow these instructions carefully. The quality and performance of the toner cartridge will depend on your workmanship as well as
the condition of the used toner cartridge being rebuilt.
• This procedure should be completed in a well-ventilated area. Wear gloves and a dust mask during procedure, and ensure vacuum
system is working adequately.
Note: Refilled toner cartridges must be properly stored:
Temperature: 50ºF – 90ºF (10ºC – 32ºC)
Relative Humidity: 30% – 80% (avoid condensation)
Rebuild Instructions
Toner Refill Kit for use in Sharp AR F 201/ AR F 201 P/ AR M 160/ AR M 162/
AR M 165/ AR M 205/ AR M 207/ AR 162/ AR 162 S/ AR 163/ AR 164/ AR 201/
AR 206/ AR 207 Copiers
1. To begin, remove 2-piece waste container lid by removing the six screws located on top of toner cartridge.
(1) 537 gm Toner Bottle
(1) Pour Spout (1) Integrated Circuit Chip
(1) Rebuild Instructions
2
2. Vacuum waste toner out of waste collection section.
Recommended Tools & Materials
• Screwdriver-Philips #2, 8 inch
(Katun PN: 11010107)
• Office Equipment Service Vacuum (Katun PN: 11737730)
• Chicopee Chix Soft Cloth (Katun PN: 11707338)
➡
➡
➡
➡ ➡
1