JUMO 702540 TDA-300 / TDA-3000 - Handheld thermometer Data Sheet - Manual (Page 3)

2013-12-03/00447944
Data Sheet 702540 JUMO GmbH & Co. KG • 36035 Fulda, Germany Page 3/6
Data logging function
Limit monitoring
Measurement points
User
USB interface (Universal Serial Bus) - only for TDA-3000
Additional functions
Battery charge status 3-stage display
Temperature unit °C or °F (12 x 8 pixels)
Device type TDA-300 TDA-3000
Recording type manual or automatic
Recording interval any (manually), 1 — 3600 seconds (automatically)
Contents of data record temperature, TAG No. (meas. point designation), user,
limits, and date/time
Recording capacity 99 measurements 9999 measurements
Data storage in SRAM
(volatile memory)
in EEPROM
(non-volatile memory)
Loss of data when battery is discharged
or has to be replaced
Data are retained for about 10 years,
memory can be rewritten about 100,000
times.
Limit monitoring upper and lower limit can be set for each measurement point
Temperature within the limits
Temperature above or below
the limit
Device type TDA-300 TDA-3000
Number of measurement points 5 99
TAG number
(meas. point designation) consisting of up to 11 characters (digits, letters, and symbols)
Device type TDA-300 TDA-3000
Number of users 1 99
User names - consisting of up to 11 characters
(digits, letters, and symbols)
Speed USB 2.0 (theoretically 12 Mbps max.)
Connection Mini-B connector
Connecting cable included in delivery
Supply via PC
PC operating system for Windows
®
2000, XP, Vista, 7 (32-bit and 64-bit)
Functions Peak/bottom value storage,
real-time clock (date and time),
function locking and
self-diagnostics