JUMO 902350 FOODtemp Insertion RTD Temperature Probe Data Sheet - Manual

JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Data sheet 902350 Page 1/6
Insertion RTD temperature probe
• For temperatures between -50 and +260 °C
• Steam-tight and pressure-resistant
• High mechanical strength
• For use in the food industry
• Available with multiple measuring points
Due to their special construction these robust, steam-tight insertion RTD temperature probes are
especially suited to cooking, boiling, and baking processes in all areas of food processing and
food preservation. Further application areas are autoclaves and sterilizers.
The stainless steel probe tube is available with either a concentric or an oblique probe tip (ap-
prox. 25° or 45°).
All versions have a highly vibration-resistant design. The handles are oil-resistant and acid-proof.
A Pt100 temperature sensor according to DIN EN 60751, class B, in a 2-wire circuit or 3-wire cir-
cuit is used as standard as a measuring insert.
Technical data
Connection Cable ends stripped bare; alternatively available with ferrules,
plug-in sleeves, or multi-pole plug connectors
Connecting cable Silicone, ambient temperature -50 to +180 °C
PTFE, ambient temperature -50 to +260 °C
Shielded connecting cable optionally available
Handle PPS plastic handle, ambient temperature max. +200 °C
Silicone handle, ambient temperature max. +200 °C
PTFE handle, ambient temperature max. +260 °C
FPM handle, ambient temperature max. +200 °C
PEEK handle, ambient temperature max. +260 °C
Protection tube Stainless steel 1.4571, Ø 4 mm, Ø 4.5 mm
Protection tube tip Concentric
Oblique
Measuring insert Pt100 temperature sensor, DIN EN 60751, class B, 2-wire circuit
Protection type IP67
2014-05-19/00073481