JUMO 60.8730 Process connections for dial thermometer - Manual (Page 6)

2011-11-08 / 00073325
Data Sheet 608730 Page 6/7
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Admissible load at the thermowell
Thermowells 820, 876, 871, 913
The following values describe the maximum capacity of the corresponding connection type.
The maximum sealable pressure depends on the fitting conditions and may be lower.
Thermowell made of stainless steel
Thermowell made of brass
Material Pipe and nipple: Stainless steel (1.4571)
Capacity Temperature Pipe diameter
8 x 0.75 mm or conical 10 x 0.75 mm
Max. allowable pressure
100 °C 92 bar 74 bar
150 °C 88 bar 71 bar
200 °C 83 bar 67 bar
300 °C 72 bar 58 bar
400 °C 67 bar 54 bar
Max. allowable
operating
temperature* Static load +400 °C Without load +530 °C
Observe max. allowable probe temperature of the respective thermometer version.
Material Pipe and nipple: CuZn
Capacity Temperature Pipe diameter
8 x 0.75 mm 10 x 0.75 mm
Max. allowable pressure
100 °C 50 bar 40 bar
150 °C 48 bar 39 bar
Max. allowable
operating
temperature* +150 °C
Observe max. allowable probe temperature of the respective thermometer version.