JUMO 706585 LOGOSCREEN fd Operating Instructions - Manual (Page 49)

49
5 Memory Presentation (History)
page, as required.
“Scroll pages” can be ended by pressing the control knob.
Zoom and
search This function affects how many measurements are used to calculate a point in
the diagram, and to search for measurements according to date and time.
Zoom
The factory setting is “1:1”, which means that every measurement in the
History memory will be displayed. “1:2” means that every second
measurements is displayed, and so on.
h Select the zoom factor by rotating the control knob.
h Close the dialog window and activate the new zoom factor by pressing the
control knob.
h Selecting “Exit” closes the dialog window, and the presentation remains
unchanged.
Fit to screen
This function is only available for presenting the data for a completed batch. If
this function is selected, the zoom factor will automatically be adjusted so that
the measurement curve for the completed batch is shown in one window.
However, 1:1 presentation should be used for evaluating a batch.
Search
If you select “Search”, the dialog window for entering the date will be shown.
h Select the date and time, and use OK to close the dialog.
If the date that was entered is in the History memory, the cursor will move to
this position and the data will be shown.