JULABO ME Heating Immersion Circulator - Manual (Page 9)

ME
9
2.4. Technical specifications
Heating Immersion Circulator ME
Working temperature range °C 20 ... 200
Temperature stability °C ±0,01
Overall dimensions (WxDxH) cm 13x15x33
Usable bath depth cm 8 ... 16,5
Weight kg 4,0
All measurements have been carried out at:
rated voltage and frequency
ambient temperature: 20 °C
bath fluid: water operating temperature: 70 °C
Technical changes without prior notification reserved.
ME
Mains power connection 230 V/50 Hz V/ Hz 190 ... 253 / 50-60
Current draw (at 208 V / 230 V) A 8 / 9
Mains power connection 115 V/60 Hz V/ Hz 90 ... 127 / 50-60
Current draw (at 100 V / 115 V) A 8 / 9
ME
Temperature selection digital
via keypad indication on VFD COMFORT-Display
remote control via personal computer indication on monitor
Temperature indication VFD COMFORT-DISPLAY
Resolution °C 0.01
Absolute Temperature Calibration INT/EXT °C ±3 / ±9
Temperature control PID3 cascade temperatur control
Heater wattage (at 230 V) kW 2,0
Heater wattage (at 115 V) kW 1,0
Electronically adj. pump capacity stages 1 ... 4
Flow rate at 0 bar l/min 11 ... 16
Pressure max. at 0 liter bar 0.22 ... 0.45
Electrical connections:
External alarm device Vdc/mA 24-0 / max. 25
Computer interface RS232
External temperature sensor Pt100
Ambient temperature °C 5 ... 40