JULABO ME Heating Immersion Circulator User Manual
Page 20
Preparations
20
Pt100
RS 232
15
A
M
P
15
A
M
P
V
JULABO MVS
27
25a
25b
26
For applications near ambient
temperature (20 °C), the cooling water
temperature should at least be 5 °C
below the working temperature.
By installing the MVS controller (26)
and a solenoid valve (27), sudden
temperature increases can be rapidly
reversed by tap water flowing through
the built-in cooling coil.
For applications requiring constant
near-ambient temperature, tap water is
thus only used in small amounts.
The circulator provides the necessary
control pulse via the connector (15).
Cooling coil connectors (25a, 25b)
Order No.
Description
9 790 000
MVS controller
8 980 700
Solenoid valve
FD200 Flow-through cooler
Order No. 9 655 825
The FD200 is suitable as cooling device for liquids in closed circuits
(loops).
This unit is integrated in the return flow circuit from the external
system connected to a circulator, and continuously withdraws heat
from the liquid.
NOTE: Immersion coolers are used for countercooling instead of tap
water in applications below room temperature.
Order No.
Description
9 650 820
FT200
9 650 840
FT400
8 970 400
Clamp for cooler probe for stainless steel or
plexiglass
bath
tanks