JULABO FD200 Flow-Through Cooler - Manual (Page 5)

5
If you have any questions concerning the operation of your unit or the information in this
manual, please contact us!
Contact JULABO GmbH
Eisenbahnstraße 45
77960 Seelbach / Germany Tel. +49 (0) 7823 / 51-0
Fax +49 (0) 7823 / 24 91
[email protected]
www.julabo.de
Safety instructions for the operator:
 Avoid strikes to the housing, vibrations, damage to the operating-element panel (keypad,
display), and contamination.
 Make sure the product is checked for proper condition regularly (depending on the
conditions of use). Regularly check (at least every 2 years) the proper condition of the
mandatory, warning, prohibition and safety labels.
 Make sure that the mains power supply has low impedance to avoid any negative effects
on the instruments being operated on the same mains.
 This unit is designed for operation in a controlled electromagnetic environment. This
means that transmitting devices (e.g., cellular phones) should not be used in the
immediate vicinity.
 Magnetic radiation may affect other devices with components sensitive to magnetic fields
(e.g., monitors). We recommend maintaining a minimum distance of 1 m.
 Permissible ambient temperature: max. 40 °C, min. 5 °C.
 Permissible relative humidity: 50% (40 °C).
 Do not store the unit in an aggressive atmosphere. Protect the unit from contamination.
 Do not expose the unit to sunlight.
Appropriate operation
Only qualified personnel is authorized to configure, install, maintain, or repair the circulator.
Persons who operate the circulator must be trained in the particular tasks by qualified
personnel. The summarized user guidance (short manual) and the specification table with
information on individual parameters are sufficient for this.
Use
The bath can be filled with flammable materials. Fire hazard!
There might be chemical dangers depending on the bath medium used.
Observe all warnings for the used materials (bath fluids) and the respective instructions
(safety data sheets).
Insufficient ventilation may result in the formation of explosive mixtures. Only use the unit in
well ventilated areas.
Only use recommended materials (bath fluids). Only use non-acid and non corroding
materials.