Brother DCP-7055 - Manual (Page 14)

Chapter 2
8
b
While pressing the green paper-guide
release lever (1), slide the paper guides
to fit the paper size you are loading in
the tray. Make sure that the guides are
firmly in the slots.
c
Fan the stack of paper well to avoid
paper jams and misfeeds.
d
Put paper in the tray and make sure:
 The paper is below the maximum
paper mark (b b b) (1).
Overfilling the paper tray will cause
paper jams.
 The side to be printed on must be
face down.
 The paper guides touch the sides of
the paper so it will feed correctly.
e
Put the paper tray firmly back in the
machine. Make sure that it is completely
inserted into the machine.
1
1
1