INFICON 3000 Micro GC Gas Analyzer Installation - Manual (Page 2)

INSTALLATION CHECKLIST
INFICON 3000 Micro GC
Installation Checklist
IPN 074-543-P1B
2 of 3
Calibration Gas
(continued)
NOTE: For the most accurate measurements, users should calibrate with a gas
that most closely resembles the actual sample gas composition.
NOTE: Any checkout gas mixtures supplied by INFICON are for instrument
installation and start-up needs only.
Sample Gas Pressure Range
Introducing high pressure sample gas without proper pressure reduction may damage
the 3000 Micro GC. The following table lists the various connections and a
recommended pressure range. Do not connect a gas or sample supply above 30 PSI
directly to the sample inlet.
Ample Bench Space
 . . . .The 3000 Micro GC should be installed in a location which allows easy access to
the instrument and laptop/PC.
3000 Micro BC Dimension H x W x D
1-2-channel: 5.9” x 9.8” x 16.1” (15 cm x 25 cm x 41 cm)
3-4-channel: 6.1” x 18.5” x 16.5” (15.5 cm x 47.2 cm x 42 cm)
Portable: 6.1” x 14.3” x 16.3” (15.5 cm x 36.4 cm x 41.3 cm)
Electricity
 . . . .Standard 100~240 V (ac) electric outlet—no special requirements.
 . . . .Uninterruptible power supply/surge protector recommended.
Sample conditioner 1,2-channel 3,4-channel Portable Pressure input
Direct connection to external filter assembly with tedlar
bag, gas tight syringe, sampling bottle, or tank. G2801-60900 ambient to 30 PSI
Gas-liquid separator G2817A 10 to 50 PSIG
Pressure reducer G2815A 50 to 1000 PSIG
Gas-liquid separator and pressure reducer G2816A < 500 PSIG
Heated regulator for sampling G2818A-[X] G2845A-[X] G2857A-[X] 2 to 800 PSIG
Heated vaporizer for LPG sampling G2819A-[X] G2846A-[X] G2858A-[X] 200 to 800 PSIG
Note: [X] represent the country power cord option.
For example, a heated regulator for Portable with US power cord will have IPN: G2857A-3