INFICON Vortex AC Refrigerant Recovery Machine 115V - Manual (Page 16)

14
Vortex AC Operating Manual
NOTE: Do not return a defective unit directly to the factory. Contact your
Wholesaler or the factory for assistance.
The following Parts and Accessories for your Vortex AC are available through
the same dealer from whom you purchased the unit:
Only technically qualified personnel who are familiar with basic
electronics and refrigeration systems should install the Over Fill
Protection Device. Disassembly of the unit to rebuild the compressor or
to provide other repair work should be referred to an approved service
center as indicated above.
Item Part #
Compressor, 115 V(ac) 714-407-P1
Motor Start Relay 060-0055
Run Capacitor, 50 μf, 240 V(ac) 043-0109
Start Capacitor, 161-193 μf, 125 V(ac) 043-0106
Circuit breaker, 110/220 V, 10 A 062-0079
Cord set, IEC plug, 110 V, 15 A 068-0391
On/Off Switch 065-0261
Socket power in, IEC male 051-1359
Manifold Assembly with extensions and fittings 708-403-P1
Gauge, High Pressure, 1/8 NPT M Conns. 708-402-P1
Gauge, Low Pressure, 1/8 NPT M Conns. 708-401-P1
Pressure Switch, high pressure cutout 032-0055
Condenser Assembly with tubes 708-204-G1
Case Housing - right side 714-306-P1
Case Housing - left side 714-307-P1
Strap, shoulder 708-404-P1
Cap and strap, plastic with lead 070-1107
Handle, SS tube 708-311-P1
Overfill Protection Device Cable - Yellow QC20032
Overfill Protection Device Complete (with LED cover plate) 708-203-G1