iCreation i-800 - Manual (Page 52)

Connecting
Connect the plug of the power supply to the power jack of the base,
and then plug the power supply into a standard AC wall outlet.
Connect one end of the phone line cord to the phone line jack on the
base, and then connect the other end to a standard phone wall outlet. 2
1
Installing the Battery
Rechargeable Li-ion battery pack (1000mAh) comes with your phone.
Install the batteries before use.
Break the battery cover off
.
Insert new battery as indicated.
Replace the battery cover and snap it into place.
from the position indicated in the
picture below
2
1
3
14
To phone wall
outlet To AC wall outlet
51
Resetting the Handset or the Base
If you reset the handset or the base, all of the user-selectable
features restore to the factory settings: When resetting the
handset, the incoming and outgoing lists will be erased, but the
Contacts and Flash time do not reset.
. It is useful
for the following purposes:
If you have made many wrong settings and you want to
restore the handset to the factory presets.
If the phone shows logical malfunctions (incorrect symbols
on the display, incorrect behavior, etc.), the problem can be
caused by a switching power supply noise or an electrostatic
spike that can temporarily alter the memory of the internal
microprocessor. Resetting could solve the problem.
The handset and base can be reset independently
Press to display the main menu items.
Press to choose , then press .
Press or to choose , then
press .
The handset asks you to enter the current handset PIN code
(the default PIN is
). Use the numeric keys to enter and
press . " " appears. Press
to confirm.
Press .
Menu
Select
Up Down Reset handset
Select
0000
OK Reset ?
OK
beneath
beneath
beneath
beneath beneath
1
2
3
4
5
Resetting the Handset
Handset