iCreation i-800 User Manual

Page 5

Chapter 2: Bluetooth and Remote Control

Pairing with an iPhone

Connecting an iPhone

Disconnecting an iPhone

Removing a Paired iPhone

Remote Control for Music

Contents

Chapter 1: Getting Started

Features List

Phone Layout

Key Functions

Handset Screen

Package Contents

Connecting

Installing the Battery

Charging

Turning On or Off the Phone

Registering a New Handset

Deactivating a Handset

Choosing the Dialing Mode

Setting Date & Time

Chapter 3: Basic Functions

Making a Call

Receiving a Call

Using the Speakerphone

Adjusting the Volume

Muting a Call

Symptom

Solution

The p

hone doesn't work

properly with some special
services or if it is connected
to an exchange extension
(PABX).

The h

andset can only

receive calls. The keypad
locked.

The b

attery charge level is

very low.

Logical malfunctioning in
the handset or base unit.

Disable Bluetooth in the
iPhone and then enable it
again, the disconnected
Bluetooth connection
between the base and the
iPhone cannot be
automatically resumed.

If there are interference
signals near or iPhone was
taken away from the base
(longer than 10 meters)
ever, the phone may lose
the connection with iPhone.

Press and hold .

Check the Flash time and set it
properly.

Clean the charging pins, and if
the problem is still not solved,
replace the batteries.

Try resetting the handset or the
base.

Due to differences in each
iPhone's software, so it is normal
for some iPhone that the
Bluetooth connection cannot be
automatically resumed. If in this
case, please establish the
Bluetooth connection manually
(See P20~ P21 "Connecting an
iPhone").

Switch off Bluetooth feature on
iPhone, then switch it on again.
/ Power off the base and then
power on.