Hydro-Logic StealthRO100 - Manual (Page 8)

VWHDOWK52
100
™ Setup
&RQQHFWLRQV
,QLWLDO 6HWXS
Connect the 1/4” blue purified water tubing to the outlet of the Automatic
Shut-off valve. The system comes with a 3:1 waste water to purified water
ratio. This is industry standard for most water sources and gives you
the best trade off between membrane life and waste water. If you have
relatively low PPM source water or need a more efficient ratio you can choose
to use the optional 2:1 Eco-Waste Reducer included with your system.
(see instructions on Eco-Waste Reducer) or purchase the
1:1
flow restrictor +/ (call your dealer or Hydro-Logic).
Refer to specifications on these two options for detailed info on their
applications.
Connect the 1/4” black waste water tubing to the outlet of the flow
restrictor. You are now ready to connect the included garden hose adaptor
to your source water and the other end of the 3/8” white inlet tubing.
There are a variety of feed valve options available to connect to any existing
plumbing. Inquire at your dealer, or through Hydro-Logic.
Feed Line From Carbon Filter
to Membrane
Purified Water Line
Waste Water Line (Black)
Automatic Shut-off Valve
Flow Restrictor
Push in the 3/8" white inlet tubing into the 3/8” QC pressure gauge fitting.
VWHDOWK52
100