HYDAC EDS 8000 - Manual (Page 12)

User manual EDS 8000 US Page 12
Status 09.09.2009 HYDAC ELECTRONIC GMBH Part No. 669820
10 Technical specifications
Input data
Measuring ranges 500; 1000; 3000; 6000; 9000 psi
25; 40; 100; 250; 400; 600 bar
Overload pressures 1160; 2900; 7250; 11600; 14500 psi
80; 80; 200; 500; 800; 1000 bar
Burst pressure 2900; 7250; 14500; 29000; 29000 psi
200; 200; 500; 1000; 2000; 2000 bar
Mechanical connection SAE 6 9/16-18UNF2A; G1/4 A DIN 3852, Form E
Torque value 15 lb-ft (20 Nm)
Parts in contact with fluid: Mechanical connection: stainless steel
Sensor cell: stainless steel
Seal: FPM
Output data
Accuracy to DIN 16086,
Max. setting (Display) ≤ ± 0.5 % FS typ.
≤ ± 1 % FS max.
Repeatability ≤ ± 0.5 % FS max.
Temperature drift ≤ ± 0.017 % FS / °F [0.03 % / °C] max. zero point
≤ ± 0.017 % FS / °F [0.03 % / °C] max. range
Long-term stability ≤ ± 0.25 % FS / year max.
Switch outputs
Type 2 PNP transistor outputs
Switching current max. 250 mA per switching output
Switching cycles > 100 million
Reaction time < 10 ms
Ambient Conditions
Compensated temperature range -13 .. +185 °F [-25 .. + 85 °C]
Operating temperature range * -13 .. +212 °F [-25 .. + 100 °C]
Storage temperature range -40 .. +185 °F [-40 .. + 85 °C]
Fluid temperature range * -13 .. +257 °F [-25 .. + 125 °C]
Nominal temperature range of display
(read-out) +5 .. +185 °F [-15 .. + 70 °C]
mark EN 61000-6-1 / 2 / 3 / 4
Vibration resistance to
DIN EN 60068-2-6 at 0 .. 500 Hz approx. 10 g
Shock resistance to
DIN EN 60068-2-29 (11 ms) approx. 50 g
Protection class to DIN 40050 IP 67 (when an IP 67 connector is used)
Other data
Supply voltage 9.6 .. 32 V DC
Current consumption max. 35 mA
(inactive switch output)
Display: 4-digit, LED, 7-segment,
Height of digits 4.5 mm
Life expectancy > 10 million cycles (0 .. 100 %)
Weight: approx. 70 g
FS (Full Scale) = relative to the complete measuring range
* extended temperature range possible. By separate request.