Humanscale T7 - Manual (Page 38)

37
7.4 SHUTdOWN SWITCH
The T7’s shutdown switch is located underneath the work surface, in the rear left-hand corner as ou are facing the cart.
Its main function is to limit power to the customer accessory outlets. It also turns the touch screen display off shown
on page # 36. This function is useful when initially configuring the added cart equipment (hardware, monitor, etc.) or to
reduce discharge of internal battery source when the cart will not be used for an extended period of time. (Note: Setting
the shutdown switch to the off position also disables the Optional Remote Power Management. See Section 7.5, Optional
Remote Power Management).
7.5 OPTIONAL REMOTE POWER MANAGEMENT
Available as a factory option, a Remote Power Management program allows cart users to monitor the operation and status
of the onboard power system. With software provided by Humanscale—installed on a host computer and connected to the
power system via USB cable—users can view remaining battery run time, charge status, remaining charge time, and other
key performance indicators:
• Battery Model: Model number of specific battery module installed in cart: 480 w/hr, 720 w/hr or LiOn
• Battery Type: Sealed Lead Acid (Pb) or LiIon (Li)
• Battery Install Date: Date on which new or replacement battery module was installed (useful to determine
approximate service life remaining)
• Battery Life Remaining: Amount of charge capacity, or run-time percentage, of the battery module, based on real-time
system load
• Battery Voltage: Present voltage level of the battery source
• Battery Temperature: Average case temperature of the batteries in the system
• Charge Status: Indicator of the present charge mode
• Charge Cycles: Number of cumulative battery charge/discharge cycles
• Charge Current: DC amps presently being delivered to recharge the batteries
• Discharge Current: DC amps presently being delivered from the batteries to the cart power system
Remote Power Management Interface