Brother DCP-375CW - Manual (Page 45)

Printing photos from a memory card
37
5
Sharpness
5
You can enhance the focus of an image by
adjusting the sharpness.
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture.
Press OK.
c
Press a or b to choose
5.Color Enhance.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.
„ If you choose Off, then go to
step g.
e
Press a or b to choose 4.Sharpness.
Press OK.
f
Press a or b to increase or decrease the
sharpness.
Press OK.
g
Press Stop/Exit.
Colour Density
5
You can adjust the total amount of colour in
the image to improve a washed out or weak
picture.
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture.
Press OK.
c
Press a or b to choose
5.Color Enhance.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.
„ If you choose Off, then go to
step g.
e
Press a or b to choose
5.Color Density.
Press OK.
f
Press a or b to increase or decrease the
amount of colour.
Press OK.
g
Press Stop/Exit.
Note
Choosing White Balance, Sharpness, or
Colour Density will make printing time
slower.