Applied standards and guidelines, Safety instructions, Warning notices – Heidolph MR Hei-Mix D User Manual
Page 9

1
Applied standards and guidelines
NOTICE
EC declaration of conformity
See the "EC declaration of conformity" enclosed.
Safety instructions
WARNING
Risk of injury due to failure to observe safety signs and safety in-
structions!
Dangers emerge when safety signs, located on the device, are not ob-
served or when safety instructions detailed in the operating instructions
are not followed.
Please note the safety signs.
Please carefully read and observe the safety instructions provided.
Warning notices
The design of warning notices is based on a combination of signal words and continuous text.
In this way, the signal word indicates the level of risk. The following table explains the significance of each of
the signal words.
Signal word
Meaning
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or seri-
ous injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, may result in minor or
moderate injury.
NOTICE
NOTICE indicates a property damage message
The warning notice also provides information on the type and source of the danger, the possible consequences
of the danger and measures to prevent any danger arising. The following example warning notice indicates
the design of a warning notice.
DANGER
The type and source of the danger are displayed here!
Here, the possible consequences are described when no measures are taken to prevent
dangers occurring.
Here, the measure for risk prevention is specified.
Other symbols used in these operating instructions provide information on the handling instructions. The fol-
lowing table explains the use of each symbol.
Symbol
Use
Explanation
Handling instructions
Here, you are required to take action.
1.
2.
3.
Handling instructions, multi-step
The handling instructions must be carried out in the
sequence specified. Deviations from this sequence
may lead to damage to the device or accidents.