Heidolph MR Hei-Mix D - Manual (Page 20)

12
Error codes
NOTICE Error code displayed on the device
1. Perform a reset.
2. Implement the measures suggested in the table below.
MR Hei-Mix L
Error code Cause Consequence Measure
LED O/I flashes x3 Speed control knob defective. Heating function off.  Please contact our
Technical Service.
LED O/I flashes x4 Motor defective. Heating function off.
Stirring function off.
MR Hei-Mix D
Error code Cause Consequence Correction
"E34" Stirring button defective. Heating function off.  Please contact our
Technical Service.
"E35" Hei-Guide rotary-push but-
ton defective.
"E41" Motor defective. Heating function off.
Stirring function off.
Maintenance
The device is maintenance-free.
Is repair work required?
 Please inform Heidolph Instruments. Repair work must be carried out by the specialized personnel author-
ized by Heidolph Instruments.
DANGER
Risk posed by electrical voltage!
Risk of damage to health and to the device.
 Remove mains plug before opening the instrument.
Cleaning
CAUTION
Damage to property as a result of corrosive cleaning agents!
Damage to the surface of the device.
 To clean the enclosure and device surface, use a damp cloth (mild
soap solution).
 Do not use cleaning rags, scouring agents, acids, alkaline solutions,
chlorine bleach, chlorine-based cleaning products or products which
contain metallic components.