Grayhill Multi-Deck Rotary Switches 09 Series - Manual (Page 3)

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Multi-Deck Rotary Switches
DIMENSIONS i
n inches (and millimeters)
Note: Common location for a single pole per
deck switch. For common location on
multi-pole switches, see circuit diagrams.
Front view shows terminal location of
36° angle of throw. Transpose rear view
for terminal location of 30° angle of
throw. See Circuit Diagrams for 60° and
90° angles of throw.
PC Mount Style
SERIES 08
SERIES 09
.5" Diameter, 1/4 Amp, PC Mount
*termination
A standard switch uses the entire 360° of each deck as required by the circuitry.
Thus one-sided termination is standard for Series 08, 36°, 1 pole switches with 1
to 5 positions per pole; it is also standard for Series 09, 30°, 1 pole switches with 1
to 6 positions per pole. Two-sided termination is standard for 1 pole switches with
more positions per pole and for switches of 2 or more poles per deck.
Special switches with one-sided termination can be made for circuitry which would
require two-sided termination in standard switches. Contact Grayhill for a special
part number. See also Special Options, page J-10.
Grayhill part number and date code marked on detent cover label. Customer part
number marked on request.
Rear Views
Series 09
30° Angle of throw
Series 08
36° Angle of throw
NON-TURN TAB .062 ± .005
(1,58 ± 0,13) WIDE By
.020 ± .003 (0,51 ± 0,08) THICK
SEE NOTE
.260 ± .015
(6,60 ± 0,38)
C
L OF NON-
TURN
TAB
.094 ± .010
(2,38 ± 0,25)
DIM. A + .046 – .020
(+ 0,05 – 0,51)
DIM. B REF.
STUD
PROJECTION
#0 THREAD
.375 ± .020
(9,53 ± 0,51)
.312 ± .020
(7,92 ± 0,51)
.125 + .001 – .002
(3,18 + 0,03 – 0,05)
DIA.
1/4-32 UNEF-2A THREAD
INTEGRAL ASSEMBLy NUT,
DO NOT REMOVE
COMMON LUG
.562 (14,27) SER. 8
.625 (15,88) SER. 9
± .015 (0,38)
C
L
.250 ± .020
(6,35 ± 0,51)
C
L C L
.134 ± .010
(3,40 ± 0,25)
.135 ± .015 (3,43 ± 0,38)
.134
± .010
(3,40
± 0,25)
.588 ± .020
(14,73 ± 0,51)
1
2
3
4
5
6 7
8
9
10
GRAyHILL
.562 ± .020
(14,27 ± 0,51)
DIA.
.187 ± .015
(4,75 ± 0,38)
TyP.
.140 ± .015
(3,56 ± 0,38)
TyP. 11
12
1.200 ± .020
(30,48 ± 0,51)
TyP.
.070 ± .010
(1,78 ± 0,25)
TyP.
1
2
3
4
5 6
7
9
9
10
GRAyHILL
.500 ± .020
(12,7 ± 0,51)
DIA.
1.125 ± .020
(28,58 ± 0,51)
TyP.
.187 ± .015
(4,75 ± 0,38)
TyP.
.140 ± .015
(3,56 ± 0,38)
TyP.
TERMINAL DIMENSIONS AT
THIS POINT ARE .032 + .000 – .010
(0,81 + 0,00 – 0,25) WIDE
By .015 + .000 – .003
(0,38 + 0,00 – 0,08) THICK
FEAtuRES
• Gold-plated Contact System
• 30°, 36°, 60° or 90° Angle of
Throw Options
• Compatible with Logic Level
Voltages and Currents