Blaupunkt RADIOPHONE / CASSETTE TCM 127 - Manual (Page 46)

108
Programming with DSC Telephone
Thanks to DSC (Direct Software Control), it
is possible to adapt several of the Radio-
phone settings and functions to your own
personal needs and to store these altera-
tions.
The Radiophone has been set at the facto-
ry.
In the following you will find an overview of
the default settings, so that you can reset
the unit to these basic settings if necessary.
If you wish to alter the programming:
•
First select the operating mode, e.g.
telephone mode, if you would like to
alter the volume for hands-free opera-
tion.
Access the DSC menu
•
by pressing DSC/OK briefly.
Select:
Use the rocker switch / to select the
menu item you wish to alter and press OK
to confirm your selection.
Alter:
Press << / >> to alter the setting shown in
the display and confirm your change by
pressing OK.
Cancel:
•
Press CL, the altered setting will not
be stored.
Store/confirm:
•
Press OK.
End DSC:
•
Press CL.