Blaupunkt RADIOPHONE / CASSETTE TCM 127 User Manual

Page 26

You cannot alter the programming for
important DSC settings unless you have
entered the access code first (refer to the
DSC menu item “CHANGE ACCESS-
CODE”).

Select function

<< / >>

Make setting

LOUDNESS

Boosts low frequencies for more
bass, especially at low volume.

LOUD 1 - minimum boost
LOUD 6 - maximum boost

MASTER RESET

This menu item will appear only if
a KeyCard is inserted.
Important!
This function will reset all of the
settings in the DSC menu includ-
ing the telephone menu to the fac-
tory default settings.

All of the trained KeyCards and
SIM cards will be deleted, except
for the KeyCard currently in the
unit.
If this menu item is selected, it will
be necessary to enter the access
code after OK. Enter the access
code, press OK.
The display will show “MASTER
RESET?”: Press CL to cancel this
function, press OK to reset all of
the settings to the default set-
tings.

CHANGE ACCESSCODE

The access code is used to ac-
cess the important DSC menu
items (also for telephone opera-
tion). At the factory, this code is
set to “0000”.
If you would like to alter it be sure
to make a note of the new code!
Enter the original code (in this
case “0000”) and press OK.
Enter the new code, press OK.
Enter the new code once again,
press OK.

IGNITION TIMER

Use this setting to ensure that the
car radio will play for a maximum
of 90 minutes after the ignition
has been switched off.
0 = ignition timer switched off.

AUXILIARY SOURCE

This menu item will not appear if
a CD changer (A 05 or A 06) has
been connected to the system.
The default setting is “AUXILIARY
SOURCE OFF”.
If an external piece of equipment
is connected to the system, this
setting must be switched to
“AUXILIARY SOURCE ON”.

VARIOCOLOUR

Adjusts the colour of the display
illumination to the dashboard illu-
mination.

green ...................................... red

KEY TONE

After a key is pressed, a short
beep is emitted as confirmation.
Set volume from 0 to 9 (0 = off).