Blaupunkt RADIOPHONE / CASSETTE TCM 127 - Manual (Page 12)

74
For more detailed information refer to
“Programming with DSC - LOUD-
NESS”.
3 SRC (Source)
You can switch between the operating
modes for radio, cassette and changer
(option) or an auxiliary unit.
You can switch from the telephone
menu back to the last operating mode
selected.
This assumes that you are not talking
on the telephone or trying to place a
call.
4 TA (Traffic Announcement = priority
for traffic messages)
If “TA” appears in the display, you will
be able to tune into radio stations
which broadcast traffic information
only.
Switch priority on/off: press TA.
5 TS / BND
Switch between the memory levels/
wavebands FM, TS (Travelstore), MW
and LW.
Additional Travelstore function
Store the nine radio stations with the
strongest reception signals using Trav-
elstore: Press BND until you hear a
beep or until “TRAVELSTORE” ap-
pears in the display.
6
Dolby B NR*
Cassettes recorded with Dolby B NR
will be played back in the best quality
possible if “DOLBY” appears in the
second line.
* Noise reduction system manufactured under li-
cence by Dolby Laboratories. The word Dolby
and the double-D symbol are trademarks of Dol-
by Laboratories.
7
Eject cassette
Press the button until the cassette
ejects.
Track switch
Press the button briefly to switch cas-
sette playback to the other track (side)
of the tape.
2 / AUD
Press AUD once:
Alter treble and bass settings using the
rocker switch.
Treble +
Treble –
Bass –
Bass +
Press AUD twice:
Alter balance (left/right) and fader
(front/rear) settings.
Fader front
Fader rear
Balance left
Balance right
The settings will be indicated in the
display. The last setting made will be
stored automatically.
Switch off AUD: Press AUD for a third
time.
If no changes are made for a period of
8 seconds, the AUD setting will end
automatically.
Switching Loudness on/off:
Press AUD for approx. 1 sec. (beep).
The current setting will appear briefly
in the display (ON/OFF).