Bunn VLPF - Manual (Page 19)

Page 19
SERVICE (cont.)
LIMIT THERMOSTAT
Location:
The limit thermostat is located on the tank lid be-
tween the tank heater terminals.
Test Procedure:
1. Disconnect the brewer from the power source and
remove the blue wire from the limit thermostat.
2. With a voltmeter, check the voltage across the blue
wire removed from the limit thermostat and the
white wire on the tank heater terminal when the
control thermostat is turned “ON” (fully clock-
wise). Connect the brewer to the power source.
The indication must be 120 volts ac.
3. Disconnect the brewer from the power source.