EUCHNER CES-AR-C01-AH-SA (Unicode) - Manual (Page 4)

Operating Instructions Safety Switch CES-AR-C01-AH-SA
4
Important!
Ì In the case of series connection of more than 11 devices, the PFH
d
can be
calculated according to one of the stated methods in EN ISO 13849-1:2008,
section 4.5.1.
Ì If the simplified method according to section 6.3 of EN ISO 13849:2008-12
is used for validation, the Performance Level (PL) might be reduced when
more than 11 devices are connected in series.
Ì It is only allowed to use components that are permissible in accordance with
the table below.
Possible combinations for CES components
Safety switches
Actuator
CES-A-BBA 071840 CES-A-BP
A
098775 CES-A-BRN 100251
CES-AR-C01-AH-SA
098941
Key to symbols Combination possible
Note:
Devices with version number V 1.1.2 or higher can be operated on an AR evalua-
tion unit. Please refer to the operating instructions for the relevant AR evaluation
unit for more information.