Eschenbach Optik Opti Lite - Manual (Page 39)

OPTi Lite User Manual
Page 38
Rev B English
Semi Colours
When
OPTi starts up in screen
magnification mode, the image modes
available to the user are; full colour Photo
mode,
Black/White Negative and
Black/White positive. Semi colours are
switched
off. The semi-colours are
defaulted to off to keep the load on the
computer low when running in screen
magnification mode. You can switch semi-
colours back on using the setting in the
Advanced menu. This menu is accessed
from the preferences menu. From the
keyboard press Ctrl+M, O, P,A The image
below shows how this menu appears.
OPTi Preferences Advanced menu