Equity by La Crosse 31112 Mood Light Alarm Clock User Manual
Page 5
USING THE SLEEP FUNCTION (FOR SOUND AND LIGHT)
You can set a sleep timer to play the nature sound or the light for 5, 10, 15, 30, 45,
0,75
or 90 minutes before you go to sleep.:-
time
to select your
ress SOUND to select the nature
6
1. Press SLEEP to enter the sleep mode. LCD displays the default sleep
“05” (5 minutes) and SLEEP. Press the SLEEP one at a time
desired sleep time.
2. When minutes of sleep time is displayed, p
sound you like. Press
or
to select the volume.
3. When the display changes back to show the time, press SLEEP once to sho
the sleep time remaining.
4. When the programm
w
ed sleep time reaches 00, the nature sound and / or the
s and hold SLEEP or
ll stop the SLEEP and activate the SOUND function.
. Press SOUND once to activate the nature sound, then press
light will be turned off.
5. To stop the SLEEP function before it reaches 00, pres
press SLEEP several times until the LCD displays OFF.
Remark: when SLEEP is activated and the LCD returns to normal time display,
press the SOUND once wi
USING THE AUX LINE-IN TO PLAY MUSIC
or
1
to
of your unit, the LCD shows AU for a few seconds and return to normal time
u cannot adjust
AP TIMER
15, 30,
select the volume of your unit to play the AUX function.
2. Plug in the AUX cable (not included) to the AUX LINE-IN opening at the back
display.
3. Turn on your MP3 device to listen to your music through your unit.
4. You can adjust the music volume on your MP3 device (yo
music volume on your unit when AUX is being played).
USING THE N
The NAP timer allows you to have a short rest and wake you up in 5, 10,
45, 60,75
or 90 minutes.
1. Press / NAP once, the display shows the NAP icon and the default naptime
“05” (5 minutes).
2. Press / NAP again to select your desired naptime. It will exit to time display
when the nap timer is counting. When the nap timer
if no button is pressed for 5 seconds.
3. The NAP icon appears
reaches 00, the alarm will sound and the NAP icon will flash. Press and hold
/ NAP
once to stop the nap alarm, the NAP icon will go off.
4. To stop the NAP timer before it reaches 00, press and hold / NAP until the
beep stops.
Remark : the NAP timer cannot be set when the SLEEP or SOUND function is in
use.
P.5