Equity by La Crosse 30221 Desktop Station User Manual
Desktop station
30221
Desktop Station
Quick Setup Guide
Features
Forecast Indicator
Temperature and Humidity with Min / Max
Comfort Indicator
Temperature History
Time and Date
Day of Week
Alarm with Snooze
Backlit LCD Display
Configuration
To set the time:
- Press and hold the MODE/SET button for 3 seconds. Set the
HOUR by pressing the UP/ALM or DOWN/°F °C buttons.
- Press the MODE/SET button again. Set the MINUTES by
pressing the UP/ALM or DOWN/°F °C buttons.
To set the Date:
- Press the MODE/SET button to view the date and month.
- Press and hold the MODE/SET button for 3 seconds until the
YEAR appears and is blinking.
- Set the YEAR by pressing the UP/ALM or DOWN/°F °C buttons.
- Press the MODE/SET button again, and the MONTH will start
blinking.
- Set the MONTH/SET by pressing the UP/ALM or DOWN/°F °C
buttons.
- Press the MODE/SET button again and the DAY will start blinking.
- Set the DAY by pressing the UP/ALM or DOWN/°F °C buttons.
Note: The day of the week is automatically set.
To set the Alarm:
- Press the MODE/SET button until the alarm time is displayed in
the bottom segment of the LCD (indicated by the alarm bell icon
in the upper left corner of the time section).
- Press and hold the MODE/SET button for 3 seconds until the
ALARM HOUR is blinking. Set the ALARM HOUR by pressing the
UP/ALM or DOWN/°F °C buttons.
- Press the MODE/SET button again. Set the ALARM MINUTES by
pressing the UP/ALM or DOWN/°F °C buttons.
Operation
IMPORTANT: Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc), or rechargeable (Ni-Cad)
batteries.
Function Buttons
MODE/SET BUTTON:
Press the MODE/SET button one time
to view the date and month. Press the
MODE/SET button twice to view the
current alarm time.
Pressing the MODE/SET button again
will return to the default view of the
current time.
MAX/MIN BUTTON:
Press the MAX/MIN button once to
view the MAXIMUM temperature and
humidity.
Press the MAX/MIN button again to
view the MINUMUM temperature and
humidity.
Note: If the MAX/MIN button is not pressed for approximately 8
seconds after pressing it once, it will return to the current temperature
and humidity. To display the MINIMUM temp and humidity, it is
necessary to press the MAX/MIN button twice within roughly 5 seconds.
SNZ (snooze) BUTTON:
Press the SNZ button once during
normal operation to turn the LCD
backlight on. Press the SNZ button
while the alarm is sounding to activate
the snooze mode. The LCD backlight
will come on and the alarm will be
silenced for roughly 8 min, after which
the alarm will sound again.
LIGHT BUTTON:
Press the LIGHT button to activate
the LCD backlight.
The light stays on for approximately
8 seconds.
Other Functions
To view the date:
While viewing the time, press the MODE/SET button and the date and
month will be displayed.
To view the alarm time:
While viewing the TIME, press the MODE/SET button (the date and
month will be displayed), then press the MODE/SET button again. The
currently set alarm time is displayed.
Turning the Alarm ON/OFF:
To turn the alarm on or off, just press the UP/ALM button once. When
the alarm is ON, a little alarm bell icon is displayed in the upper left
corner of the time section. If the little alarm icon is not showing, the
alarm is turned OFF.
12/24 Hour Format:
With the time displayed normally, press the UP/ALM button and hold it
pressed for 3 seconds. This will switch the time format from 12 to 24
hour format and back.
Note: The default mode is 12 hour time.
Fahrenheit / Celsius:
To change the temperature display between Celsius and Fahrenheit,
press the DOWN/°F °C button.
Warranty
Equity products are warranted for two years from the date of consumer
purchase against defects in material and workmanship. During this
period such defects will be repaired, or the product will be replaced at
Equity’s option, without charge. This warranty does not cover damage
caused by misuse or negligence. ALL IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR
FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION
TO THE PERIOD ENDING ONE YEAR FROM THE DATE OF
PURCHASE. Some states do not allow limitations on how long an
implied warranty last so the above limitation may not apply to you. This
warranty gives you specific legal rights and you may have other rights,
which vary from state to state.
If your clock isn’t working, send it with a letter explaining the problem
and $5.00 for postage and handling to:
Equity Warranty Dept.
2817 Losey Blvd. S
La Crosse, WI 54601
For customer support on the web:
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or
duplicated or processed using electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is
regularly checked and corrections made in the next issue. We accept no liability for technical
mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
EJMA2318L210#
Printed in China
Mode/Set Button
Up/Alm Button
Down/°F °C Button