Equity by La Crosse 31112 Mood Light Alarm Clock - Manual (Page 2)

BUTTONS
/ DIMMER, SET, ALM 1 . 2,
Zz
. , SOUND, SLEEP,
/ NAP
INSTALLATION
Plug the AC/DC adaptor to an AC household outlet, and then plug the DC jack to
the back of the unit. Your clock is ready to work for you.
BACKUP BATTERY INSTALLATION
Your clock requires 3 x new AAA batteries (not included) to provide backup power
to it in the event of a temporary power interruption.
1. Place your unit face down on a flat surface.
2. Slide and remove the battery cover at the bottom of your unit.
3. Insert 3 x new AAA batteries into the battery compartment by observing the
correct “+” and “-“ polarity.
4. Replace the battery cover.
If AC power is interrupted, the always-on LCD backlite will go off and wake-up
light and color changing light does not function. The backup battery will keep the
time and all settings of your unit. Make sure new AAA batteries are used.
SETTING THE TIME, 12/24 HR TIME AND SNOOZE DURATION
1. Press SET once: time digits 12:00 flash, press
or to set time. Press
and hold or to accelerate setting in fast speed.
2. Single press SET: 12 Hr digits flash, press or to select 12Hr  24Hr.
In 12Hr mode, PM will appear on the display to indicate afternoon time. There
is no AM indicator.
3. Single press SET : Zz and 05 flash. Press or to set snooze duration
(from 5 min to 60 min.)
4. Press SET again or if no key pressed for approx. 10 seconds to exit the setting
mode.
SETTING THE ALARMS
1. Press ALM 1.2 once, the 1 icon and hour digits 6:00 (AM) flash, press
or
to set alarm 1’s time. Press and hold or to accelerate setting in
fast speed.
2. Press ALM 1.2 once again, LCD displays OFF (default Alarm 1 is OFF),
press or to select the type of sound you would like to listen to when
you wake up:-
bu
Wake-by-Beep ( icon appears)
N1
Wake-by-bird sound ( icon appears)
N2
Wake-by- forest sound ( icon appears)
P.2