Series 2400 – Englert S2400 User Manual

Page 3

1.07 WARRANTY

Manufacturer shall warrant the metal roof against rupture or perforation or from structurally failing due to normal
atmospheric conditions for a period of twenty (20) years. In addition, Manufacturer shall provide a 30-year finish
warranty against peeling and blistering, chalk, and fade (color change).

Installer shall provide a written warranty for two (2) years from the date of final completion and acceptance,
guaranteeing materials and workmanship for watertightness, weathertightness, and against all leaks. During the initial
two (2) year period, the Installer shall assure weathertightness and watertightness of the roof, without any cost to the
building owner.

PART II - PRODUCTS

2.01 ACCEPTABLE MANUFACTURER

ENGLERT, INC.
1200 Amboy Avenue
Perth Amboy, New Jersey 08861
Tel: (732) 826-8614
Fax: (732) 826-8865

SERIES 2400

2” High Structural/Architectural

Mechanically Locked Standing Seam

NOTE TO SPECIFIER: Englert Series 2400 Panel System serves the structural needs of roofing/fascia, mansard, and siding
systems.
The Series 2400 Panel System, also available at 1-1/2” may be specified for application over solid deck, 1/2” plywood or 22 gauge
metal deck with 2 layers of 15# felt or 1 layer of 30# felt. Minimum slope 1/2” and Series 2400 2” may be specified for application
over open 16 gauge purlins at 4’-0” o.c. Minimum slope 1”/12” up to 75’ panel lengths. Specify as required.