Englert S3000 - Manual

1
YSTEM
PECIFIER
www.englertinc.com
MANUFACTURER
ENGLERT, INC.
1200 Amboy Avenue
Perth Amboy, New Jersey 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
SECTION 07411 - MANUFACTURED ROOF PANELS
This specification guide
is designed to assist in
the proper insertion of
Englert Roof Systems
into any architectural
building specifications.
This guide is formatted
to match the CSI Spec
Data System, however is
not part of that program.
PART I - GENERAL
SERIES 3000
1.1 RELATED DOCUMENTS
A. Drawings and general provision of the Contract, including General and Supplementary
Conditions and Division 1 Specification Sections, apply to this Section.
1.2 SUMMARY
A. This Section includes the following:
1. Site-formed or factory-formed roof panels.
2. Factory-formed and field-assembled, metal wall panels.
3. Metal soffit panels.
4. Roof accessories as noted.
B. Related Sections include the following:
1. Division 5 Section “Steel Deck” for steel roof deck supporting metal roof panels.
2. Division 5 Section “Cold-Formed Metal Framing” for secondary support framing
supporting metal roof panels.
3. Division 7 Section “Sheet Metal Flashing and Trim”.
4. Division 7 Section “Manufactured Roof Specialties” for assemblies that are not part
of metal roof panel assemblies.
5. Division 7 Section “Joint Sealants” for field-applied sealants not otherwise specified
in this Section.
1.3 DEFINITIONS
A. Metal Roof Assembly: Metal roof panels, attachment system components, miscellaneous
metal framing, thermal insulation, and accessories necessary for a
complete weathertight roofing system.
1.4 PERFORMANCE REQUIREMENTS
A. General: Provide metal roof panel assemblies that comply with performance requirements
specified as determined by testing a manufacturers’ standard assemblies similar to those
indicated for this Project, by a qualified testing and inspecting agency.
TRI \SPECS:3000:06/03/04
S
PECIFICATION
S