Englert A1000 Specifier Sheets - Manual

1
YSTEM
PECIFIER
www.englertinc.com
MANUFACTURER
ENGLERT, INC.
1200 Amboy Avenue
Perth Amboy, New Jersey 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
SECTION 07410 - MANUFACTURED ROOF AND WALL PANELS
SECTION 07610 - SHEET METAL ROOFING
This specification guide
is designed to assist in
the proper insertion of
Englert Roof Systems
into any architectural
building specifications.
This guide is formatted to
match the CSI Spec Data
System, however is not
part of that program.
PART I - GENERAL
SERIES 1000
1.01 WORK INCLUDED
Providing all labor, materials, tools, equipment and services to furnish and install metal roofing,
wall panels/siding, including soffit, flashing, trim and such other accessories to make the
system complete and weathertight, as indicated on the drawings and specified herein.
1.02 RELATED WORK (to be coordinated with other trades by the successful contractor
under this section). FOR APPLICATIONS OVER PLYWOOD DECKING (edit as required)
A. Section 06100: Rough Carpentry
B. Section 06200: Finish Carpentry
C. Section 07620: Sheet Metal Flashing and Trim
D. Section 07700: Roof Specialties and Accessories
E. Section 07800: Skylights
F. Section 07900: Joint Sealers
OR
1.02 RELATED WORK (to be coordinated with other trades by the successful contractor.
under this section). FOR APPLICATIONS OVER METAL DECKING WITH RIGID
INSULATION AND STANDING SEAM ROOF (edit as required).
A. Section 05100: Structural Steel
B. Section 05200: Steel Joists
C. Section 05300: Metal Decking
D. Section 05580: Sheet Metal Fabrication
E Section 07200: Insulation
F. Section 07500: Membrane Roofing
G. Section 07620: Sheet Metal Flashing and Trim
H. Section 07700: Roof Specialties and Accessories
I. Section 07800: Skylights TRI\SPECS:1000:04/01/04
J. Section 07900: Joint Sealers 90311C
S
PECIFICATION
S