Englert S2000 Specifier Sheets - Manual (Page 3)

3
1.07 WARRANTY
A. Manufacturer shall warrant the metal roof against rupture or perforation or from structurally failing due to normal
atmospheric conditions for a period of twenty five (25) years. In addition, Manufacturer shall provide a 35-year
finish warranty against peeling and blistering, chalk, and fade (color change).
B. Installer shall provide a written warranty for two (2) years from the date of final completion and acceptance,
guaranteeing materials and workmanship for watertightness, weathertightness, and against all leaks. During the
initial two (2) year period, the Installer shall assure weathertightness and watertightness of the roof, without any cost
to the building owner.
PART II – PRODUCTS
2.01 ACCEPTABLE MANUFACTURER – ROOF
A.
ENGLERT, INC. – SERIES 2000
1200 Amboy Avenue
Perth Amboy, New Jersey 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
SERIES 2000
1-3/4” High Structural
Architectural Snap-Lock Standing Seam
NOTE TO SPECIFIER: Englert Series 2000 Panel System serves the structural needs of roofing/fascia, mansard, siding and
soffit systems. The Series 2000 may be specified for application over solid deck. Minimum Pitch: 3”/12”. Specify as required.
The series 2000 may be specified for application over solid deck or over purlins or over metal deck with rigid insulation. The
Series 2000 Panel System can also be secured with bearing plates and clips through the insulation to the metal deck. Minimum
Pitch: 3”/12”. Specify as required.