Englert A1000 Specifier Sheets - Manual (Page 3)

3
C. Store materials above ground, on skids. Protect material with waterproof covering and allow sufficient ventilation
to prevent condensation build -up or moisture entrapment in the materials.
1.07 WARRANTY
A. Manufacturer shall warrant the metal roof against rupture or perforation or from structurally failing due to normal
atmospheric conditions for a period of twenty (25) years. In addition, Manufacturer shall provide a 35-year finish
warranty against peeling and blistering, chalk, and fade (color change).
B. Installer shall provide a written warranty for two (2) years from the date of final completion and acceptance,
guaranteeing materials and workmanship for watertightness, weathertightness, and against all leaks. During the
initial two (2) year period, the Installer shall assure weathertightness and watertightness of the roof, without any
cost to the building owner.
PART II - PRODUCTS
2.01 ACCEPTABLE MANUFACTURER
ENGLERT, INC.
1200 Amboy Avenue
Perth Amboy, New Jersey 08861
Tel: (732) 826-8614
Fax: (732) 826-8865
SERIES 1000
1-1/2” High Architectural
Snap-Lock Standing Seam
NOTE TO SPECIFIER: Englert Series 1000 Panel System serves the architectural needs of roofing/fascia and mansard systems.