Enerpac LW-Series - Manual (Page 3)

3
Min Gap 10.0 mm
YES
NO
Optional Stepped Block
WARNING: Lifting Wedge and Safety
Block must be stabile on a level, fl at, hard
surface that can support the load.
5.0 MAINTENANCE
1. Use only Enerpac oil with these Lifting Wedges.
The use of any other oil may invalidate your
warranty.
2. Use dust caps when cylinders are disconnected
from the hose. Keep entire Lifting Wedge clean
to prolong tool life.
3. Store Lifting Wedges upright in a cool, dry place
to prevent seal distortion.
Store Grease Nipple Here
Use Grease Nipple
to Lubricate
Grease
ALTERNATE GREASE METHOD
Grease