ElmoMC SimplIQ Digital Servo Drives-Solo Guitar Installation Guide - Manual (Page 3)

Revision History
Version Date Details
Ver. 1.0 August 2008 Initial Release
Ver. 1.1 November 2008 Correction to J6 & J7 pinout diagrams
Ver. 1.2 May 2009 MTCR 01-009-41: Clarifications regarding models with
connectors and wires on Notice page (above) and page 17.
Changes to table in Section 3.3.1.
MTCR 01-009-52: Added Section 3.4.3: Motor (Brake, PTC).
Ver. 1.3 March 2010 MTCR 01-010-05: Notice page (above): The note was
updated, also updated on page 17.
MTCR 04-009-48: Table 2: Pin 2 renamed to PR.
Ver. 1.4 September
2012 Update to main board
Formatted according to the new template.
“Metronome” was replaced by the “Composer” software.
Ver. 1.401 January 2013 Updated the Powerful Digital Output Interface table.
Ver. 1.402 February 2013 Updated the Opto Digital Output Interface table.
Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
Ver. 1.403 July 2014 General format changes