ElmoMC CANopen DSP 305 Implementation Guide - Manual (Page 2)

Important Notice
This guide is delivered subject to the following conditions and restrictions:
ƒ
This guide contains proprietary information belonging to Elmo Motion Control Ltd.
Such information is supplied solely for the purpose of assisting users of
SimplIQ
servo drives in implementing CANopen networking.
ƒ The text and graphics included in this manual are for the purpose of illustration and
reference only. The specifications on which they are based are subject to change
without notice.
ƒ Information in this document is subject to change without notice. Corporate and
individual names and data used in examples herein are fictitious unless otherwise
noted.
Doc. No. MAN-CAN305IG
Copyright  2006
Elmo Motion Control Ltd.
All rights reserved.
Revision History
Ver. 1.1 Apr. 2006 COB-ID Changes
(MAN-CAN305IG)
Ver. 1.0 Nov. 2004 Initial Release
(MAN-CAN305IG)
Elmo Motion Control Ltd.
64 Gisin St., P.O. Box 463
Petach Tikva 49103
Tel: +972 (3) 929-2300
Fax: +972 (3) 929-2322
Elmo Motion Control Inc.
1 Park Drive, Suite 12
Westford, MA 01886
USA
Tel: +1 (978) 399-0034
Fax: +1 (978) 399-0035 Elmo Motion Control GmbH
Steinbeisstrasse 41
D-78056, Villingen-Schwenningen
Germany
Tel: +49 (07720) 8577-60
Fax: +49 (07720) 8577-70
www.elmomc.com