ElmoMC Gold Line Digital Servo Drives-Gold DC Bell - Manual (Page 39)

Gold DC Bell Installation Guide
MAN-G-DCBELIG-EC (Ver. 1.200)
||Port B(J3)| www.elmomc.com
39
Table of Contents
6.7. Port B(J3)
See Section 10.4 in the in the MAN-G-Panel Mounted Drives Hardware manual for full details.
Incremental or
Interpolated Analog Encoder Resolver
G-DCBEL XXX / YYYY E XX G-DCBEL XXX / YYYY R XX
Pin(J3) Signal Function Signal Function
1 +5 V Encoder +5 V supply NC
2 COMRET Common Return COMRET Common Return
3 PortB_ENC_A+/SIN+ Channel A+/Sine+ SIN+ Sine+
4 PortB_ENC_A-/SIN- Channel A -/Sine- SIN- Sine-
5 PortB_ENC_B+/COS+ Channel B+/ Cosine+ COS+ Cosine+
6 PortB_ENC_B-/COS- Channel B-/Cosine- COS- Cosine-
7 PortB_ENC_INDEX+/
Analog_Index+
Channel_Index+/
Analog_Index+
RESOLVER_OUT+ Vref f=1/TS, 50 mA
Max.
8 PortB_ENC_INDEX-/
Analog_Index-
Channel_Index- /
Analog_Index-
RESOLVER_OUT- Vref complement
f= 1/TS, 50 mA
Maximum
Pin Positions Cable Connector
8-Pin 2.54 mm Pitch Molex
8-Pin Molex Plug
his cable is included in the
cable kit described in Section
3.1.1.
Table 8: Port B Pin Assignments