BT verve 450 - Manual (Page 48)

48
If you experience any problems, please call the Helpline on 0800 218 2182* or email [email protected]
4. Scroll to
Ans & Rec
or
Answer only
and press
OK
.
5. Your message is then played back. If you want to delete it,
press
Delete
during playback. Or press
OK
to save.
Answer settings
1. Press
Menu
. Scroll to
Answer machine
. Press
OK
.
2. Scroll to
Ans. settings
and press
OK
.
3. Press or to select the outgoing message type,
Answer only
or
Ans & Rec
.
4. Scroll to
Answer delay
. Press or to select
the setting.
5. Scroll to
Recording time
. Press or to
select the maximum message length, 30, 60, 120 or 180
seconds.
6. Scroll to
Call screening
. Press or to
select
On
or
Off
.
7. Press
OK
to save.
8. Press
Back
to return to the previous menu level.
Answering machine
You cannot delete a pre-recorded
message. If you delete your Personal
OGM the pre-recorded OGM will be
automatically reinstated as your
outgoing message.
Answer mode
Choose which outgoing message you
want played to callers.
Answer delay
Answer delay sets the number of times
your BT Verve 450 will ring before the
answer machine picks up your call and
starts playing the outgoing message.
You can change the Answer Delay
setting to between 2, 4, 6, 8 rings or
Time Saver.
Time saver
When you ring in to access your
messages remotely, if your answering
machine is set to time saver and you
have new messages it will answer after
10 seconds, if you do not have any
new messages, it will answer after 20
seconds. This means you can hang up
knowing you have no new messages,
saving you time and the cost of the call.
Recording time
Set the maximum message length:
60, 120 or 180 seconds or unlimited.