beautypg.com

Elkhart Brass SPIT-FIRE 08394059 Monitor User Manual

Page 8

background image

8

Monitor Safety Boot and Clamp Installation
All Motor Cable Connections are provided with clamped safety boots. These boots must not be

removed when monitor motor control panel is energized and area is hazardous.

1. Install corrugated black plastic boot on cable connector as shown so split lines up with cable.
2. Install clamp around top of boot and connector swivel.
3. Tighten clamp down around swivel and boot.

Figure 3a: Monitor Motor Boots

Figure 3b: Nozzle Motor Boots