Elkhart Brass Stinger 2.0 8297 - Manual (Page 9)

9
C. 8299 2.0 Deck Mount Adapter
The 8299 2.0 deck mount adapter (Fig. 7) is designed to be supplied water from two 2½” or 3” hose
lines attached to the pump discharges. When planning the installation of the 8299 2.0 adapter, be sure
to consider these two important factors:
a) The location of the adapter should not result in kinking of supply hose lines
b) The mounting platform must capable of withstanding up to 900 lbs nozzle reaction force.
Drill four (4) mounting holes into the mounting platform according to the pattern shown in Fig. 12.
Fasten the 8299 2.0 using the supplied 7/16-14 UNC socket cap screws and nuts. Apply Loctite
® #242
Thread Retainer to the bolt threads.